Top-Bend Silicone LED Neon Flex FAQ
1. What is Top-Bend Silicone LED Neon Flex?
Top-Bend Silicone LED Neon Flex is a flexible linear lighting product designed to bend vertically along its light-emitting surface. It provides a smooth, continuous neon-like light without visible LED dots.
2. What is the difference between Top-Bend and Side-Bend Neon Flex?
Top-Bend Neon Flex bends upward and downward along the lighting surface, while Side-Bend Neon Flex bends horizontally from side to side. The correct bending direction should be selected according to the installation shape and application.
3. What colors are available?
We offer a wide range of options, including single color, Tunable White, RGB, RGBW, RGB+CCT, and addressable pixel versions. Custom color temperatures and special wavelengths are also available.
4. Is Top-Bend LED Neon Flex waterproof?
Yes. Waterproof versions are available for outdoor and wet-location applications, typically up to IP67 or IP68 depending on the product structure and connector solution.
5. Can it be cut to custom lengths?
Yes. The neon flex can be cut according to the specified cutting interval. We can also manufacture finished lengths with factory-installed cables, connectors, and end caps according to your project requirements.
6. What voltage options are available?
The most common options are DC12V and DC24V. DC24V is widely recommended for longer runs because it provides better voltage stability and lower voltage drop.
7. Can you provide long-run versions with less voltage drop?
Yes. Constant-current and long-run solutions are available for projects requiring longer continuous lengths. The maximum run length depends on the power, PCB design, voltage, and product size.
8. Does the neon flex show LED dots?
No. The silicone optical structure is designed to provide uniform and continuous illumination with minimal visible spotting. LED density and silicone dimensions can also be optimized for demanding architectural applications.
9. Can it be dimmed or controlled?
Yes. Depending on the version, the neon flex can work with PWM dimming, 0-10V, DALI, DMX512, Zigbee, Tuya, SPI, and other control systems.
10. What accessories are available?
We can supply aluminum mounting profiles, mounting clips, power cables, connectors, end caps, power supplies, controllers, and complete installation accessories.
11. Can it be used outdoors?
Yes. UV-resistant and waterproof silicone versions are suitable for outdoor architectural lighting, building outlines, landscape lighting, signage, and façade applications.
12. Can you customize the size and specification?
Yes. We support customized dimensions, PCB width, LED density, power, color temperature, CRI, cable length, connector type, cutting length, and control protocol.
13. What are the typical applications?
Top-Bend Silicone LED Neon Flex is commonly used for architectural outlines, curved ceilings, building façades, signage, hotels, shopping malls, landscape lighting, furniture lighting, and decorative linear lighting.
14. What is the minimum bending radius?
The minimum bending radius depends on the neon flex size and structure. Please follow the specified bending radius in the datasheet to avoid damaging the internal PCB or silicone housing.
15. Can you provide customized finished assemblies?
Yes. We can provide ready-to-install assemblies with customized lengths, pre-installed wires, molded waterproof connectors, end caps, mounting accessories, and control components.
